02/20004-24 DocuPrint N2125REP 3.8, REP 3.9Initial IssueRepair-AdjustmentREP 3.8 Paper Feed RollsParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Open the Front Chute Assembly (Figure 1).3. Release the locking tab on the Front Feed Roll and slide the roll to the right and remove(Figure 1).4. Repeat with Rear Feed Roll (Figure 1).Figure 1 Paper Feed RollsReplacement1. Reinstall the components in the reverse order.REP 3.9 Feeder PWBParts List on PL 3.1RemovalCAUTIONThese components are susceptible to electrostatic discharge. Observe all ESD procedures toavoid damage.WARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Left Cover (REP 1.2).4. Remove the Front Cover Assembly (REP 1.6).5. Remove the Left Front Cover (REP 1.7).6. Remove the Left Plate Assembly (REP 1.11).7. Remove the Plate Handle (REP 1.12).8. Open Rear Door.9. Remove the Top Cover Assembly (REP 1.4).10. Remove the Right Cover (REP 1.5).11. Remove the LVPS PWB (REP 9.5).12. Remove the Paper Feeder (REP 3.1).13. Disconnect P/J64, P/J65, P/J66, and P/J67 from the Feeder PWB.14. Remove the No Paper Actuator (REP 3.3)15. Remove the four screws that secure the Feeder PWB to the Paper Feeder (Figure 1).16. Remove the PWB (Figure 1).
