02/20004-82 DocuPrint N2125REP 11.7, REP 11.8Initial IssueRepair-AdjustmentREP 11.7 No Paper ActuatorParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 550 Sheet Feeder (REP 11.1).2. Remove the Tray from the Feeder.3. Remove the 550 Sheet Feeder Right Cover (REP 11.2).4. Remove the 550 Sheet Feeder Left Cover (REP 11.3).5. Remove 550 Sheet Gear Bracket Assembly (REP 11.4).6. Remove the Top Plate (REP 11.5).7. Remove the 550 Sheet Feeder Drive Assembly (REP 11.6).8. Rotate the No Paper Actuator up until the left end of the actuator can be removed from thesupport (Figure 1). Remove the Actuator.Figure 1 No Paper ActuatorReplacement1. Reinstall the components in the reverse order.REP 11.8 Turn Roll AssemblyParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 550 Sheet Feeder (REP 11.1).2. Remove the Tray from the Feeder.3. Remove the 550 Sheet Feeder Right Cover (REP 11.2).4. Remove the 550 Sheet Feeder Left Cover (REP 11.3).5. Remove 550 Sheet Feeder Gear Bracket Assembly (REP 11.4).6. Remove the Top Plate (REP 11.5).7. Remove the 550 Sheet Paper Feeder Drive Assembly (REP 11.6).8. Remove the No Paper Actuator (REP 11.7).9. Disconnect P/J64 on the Paper Feeder PWB (Figure 1).10. Remove the four screws that secure the Turn Roll Assembly to the Feeder Assembly (Fig-ure 1).11. Remove the Turn Roll Assembly together with the Extension Springs and Chute Spring(Figure 1).12. Unhook the left and right Extension Springs from the two notches (Figure 3).13. Remove the Chute Spring (Figure 2).Figure 1 Turn Roll Assembly
