02/20006-22 DocuPrint N2125GP 2.9 , GP 2.10Initial IssueGeneral Procedures / InformationGP 2.9 To Reset Fuser1. Power down printer.2. Simultaneously hold keys 2 and 6 down.3. Power up printer, wait for message "IOT?" to appear on the LCD.4. Release both keys, then simultaneously press keys 0 and 5 to activate the fuser resetfunction. If keys 0 and 5 are not pressed within 5 seconds of the "IOT?" message, printerwill go to the normal boot process.5. Wait for message "Reset Completed. Please reboot" to appear on the LCD then releaseboth keys.6. Power off, power on.GP 2.10 Reset Menu1. Power down printer.2. Simultaneously hold keys 0 and 4 down.3. Power up printer, wait for first * to display on the LCD line 1 then release both keys.4. Let printer go to Ready mode.5. Press 1 or 5 to scroll to Reset Menu.6. Press 2 or 6 to select Reset items (Table 1)7. Press 3 or 7 to change the values.NOTE: After execution all values except Demo Mode will return to "Default" value8. Press Enter to execute.Table 1 Reset MenuReset Menu Item Reset Menu ValuesFactory Defaults Yes (resets USB, System PCC, Tray, and Par-allel menu).No (default)Network Defaults Yes (resets Ethernet and Novell menu).No (default)Demo Mode YesNo (default)Delete All Jobs Yes (Hard drive installed)No (default)Disk Initialize Yes (Hard drive installed)No (default)Disk Format Yes (Hard drive installed)No (default)Flash Format Yes (Flash DIMM installed)No (default)
