02/20004-88 DocuPrint N2125REP 11.15, REP 11.16Initial IssueRepair-AdjustmentREP 11.15 Feeder SocketParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Tray.2. Remove the two screws that secure the Socket to the Feeder in the printer (Figure 1).3. It may be necessary to use a scribe or small screwdriver to lift the locking tabs to discon-nect P/J71.4. Disconnect P/J71 from the Socket and remove (Figure 1).Figure 1 Feeder SocketReplacement1. Reinstall the components in the reverse order.REP 11.16 550 Sheet Feeder Size Harness AssemblyParts List on PL 11.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 550 Sheet Feeder (REP 11.1).2. Remove the Tray from the Feeder.3. Remove the 550 Sheet Feeder Left Cover (REP 11.3).4. Remove the two screws that secure the 550 Sheet Feeder Size Harness Assembly to the550 Sheet Feeder and remove from the wiring harness (Figure 1).5. Remove the Feeder Gear Bracket Assembly (REP 11.4).6. Remove the Top Plate (REP 11.5).7. Remove the Feeder Drive Assembly (REP 11.6).8. Using a small screwdriver push the locking tab that secures the Size Sensor Housing tothe Feeder and remove (Figure 2).9. Disconnect P/J52 from the Size Option PWB and remove the Harness Assembly (Figure3).Figure 1 Removing Harness Assembly
