Xerox DocuPrint N2125 Service Manual

Also see for DocuPrint N2125: Product reference guide Specification sheet User guide User guide Service manual

Contents

Xerox DocuPrint N2125 Service Manual Manual pdf 203 page image

02/20004-103DocuPrint N2125 REP 13.1, REP 13.2Repair-AdjustmentInitial IssueREP 13.1 Bottom CoverParts List on PL 12.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Envelope Feeder from the printer.2. Turn the Feeder upside down.3. Remove the two screws that secure the front of the Bottom Cover (Figure 1).4. Rotate the front of the Bottom Cover up until the two rear tabs can be removed from theFeeder (Figure 1).NOTE: Make note of how the Harness Connector is inserted in the Bottom Cover.5. Lift the Bottom Cover and remove the harness connector from the cover (Figure 1).Figure 1 Bottom CoverReplacement1. Reinstall the components in the reverse order.REP 13.2 Top ChuteParts List on PL 12.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Envelope Feeder from the printer.2. Remove the Bottom Cover (REP 13.1).3. Remove the four screws that secure the Top Chute (Figure 1).4. Rotate the feeder unit up and disconnect P/J417 from the Exit Sensor (Figure 1).5. Slide the feeder unit to the right and remove it from the Top Chute (Figure 1).Figure 1 Top ChuteReplacement1. Reinstall the components in the reverse order.