02/20006-12 DocuPrint N2125GP 1.8 , GP 1.9Initial IssueGeneral Procedures / InformationGP 1.8 OptionsThere are several customer installed options available for the N2125 printer (Table 1).GP 1.9 Optional Feeder SpecificationsThe Optional Feeder Assembly consists of a 550 Sheet Paper Tray and a 550 sheet feeder.The feeder contains the mechanism to feed paper out of the 550 Sheet Paper Tray.The Optional Feeder Assembly can be used as the second and the third feeder on the printer.If two Optional feeders are installed, the bottom feeder is designated Feeder 3, and the middlefeeder is designated Feeder 2 (Figure 1).Figure 1 Optional FeedersTable 1 OptionsOption Description550 Sheet Paper FeederCustomer Order Number:97S02377Provides 550 sheet continuous feed when used in con-junction with the 550 sheet Paper Tray.You can install one or two 550 Sheet Paper Feeders.550 Sheet Paper TrayCustomer Order Number:109R00448Used with the 550 Sheet Paper Feeder. The Tray holds550 sheets of paper.Cover Assembly Rear Face UpCustomer Order Number:97S02406The tray can hold 120 sheets of 20 lb. paper or 13mm(.5") stack height.Duplex AssemblyCustomer Order Number:97S02379Provides duplex (two sided) printing capability.Offset Catch Tray (OCT)Customer Order Number:97S02380Offsets each set of printouts by 1.1 inches (2.8 cm).The tray holds up to 500 sheets of paper, in four differentpaper sizes.Envelope FeederCustomer Order Number:97S02388Provides continuous envelope feed.
