02/20004-33DocuPrint N2125 REP 4.7, REP 4.8Repair-AdjustmentInitial IssueREP 4.7 Retard Pad AssemblyParts List on PL 4.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Front Cover Assembly (REP 1.6).4. Remove the Left Front Cover (REP 1.7).5. Remove the MBF Chute Assembly (REP 4.1).6. Remove the MBF Feed Roll Assembly (REP 4.2).7. Open the Bottom Tray Assembly (REP 4.4).8. Carefully pry the left and right bracket arms of the Retard Pad Assembly from the MBFChute Assembly (Figure 1).9. Remove the assembly (Figure 1).Figure 1 Retard Pad AssemblyReplacement1. Reinstall the components in the reverse order.REP 4.8 MBF No Paper SensorParts List on PL 4.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove Tray 1.2. Remove the Left Interface Cover Assembly (REP 1.1).3. Remove the Front Cover Assembly (REP 1.6).4. Remove the Left Front Cover (REP 1.7).5. Remove the MBF Chute Assembly (REP 4.1).6. Remove the MBF Feed Roll Assembly (REP 4.2).7. Open the Bottom Tray Pick Up (Figure 1).8. Remove the MBF Bottom Tray Spring from the two studs on the MBF Chute Assembly(Figure 1).9. Release the five hooks that secures the No Paper Sensor and remove (Figure 2).10. Disconnect P/J451 from the No Paper Sensor (Figure 2).Figure 1 Bottom Tray Pick Up
