CoversThis option allows you to attach covers to the booklet. The front and back covers canbe output before the first page and after the last page of the document and on adifferent type of paper. Select a Covers option:• No Covers: No covers are added.• Blank Covers: Blank media is attached to the output to provide blank covers.• 2 Sided Covers: The first and second pages of the document are copied on both sidesof the cover.• 1 Sided Covers: The first page of the document is copied on the front side of thecover.Last Page on Back CoverThis option uses the image of the last document page and copies it onto the backcover.This option is only available for 1 Sided Covers.Binding ShiftUse this option to set the booklet binding-shift value within the range from 0 to 1.9 in.(0 to 50 mm) in 0.1 in. or 1 mm increments.Divide OutputUse this option when you have a large number of original documents. The originaldocuments are divided to create subsets in order to reduce the thickness of each booklet.The machine folds copies in half, and piles them up to form a booklet. The LightProduction C Finisher with Booklet Maker allows you to specify the number of sheetswithin the range of 1-50 sheets in one-sheet increments.Auto Image PositioningThis option adjusts the image position so that the printing position from the edge ofeach page remains consistent between the inner and outer pages of the booklet. AutoImage Positioning is available for selection if you have already selected Create Left/TopBound Booklet or Create Right Bound Booklet.Offset StackingThis option is available only when specific optional finishers are attached, such as theStandard Finisher or Booklet Maker Finisher.5-17Xerox® Color C75 PressUser GuideCopy
