024-988Cause: The booklet folder tray is fullRemedy: Check that the folder tray is correctly attached and set.024-989Cause: There is a problem with the booklet maker staplerRemedy: Check the staple cartridge and reset correctly.047-320Cause: A communication error has occurred with the finisherRemedy: Perform the following:Power off/on the machine, and if necessary, resend/restart your print job.If the error persists, contact the Customer Support Center.112-700Cause: The Punch Waste Container is full or near fullRemedy: Remove and empty the waste container, then reinstall it.116-790Cause: The settings for stapling are canceled and prints the dataRemedy: Confirm the staple position and try to print again.124-705Cause: The settings for punching are canceledRemedy: Confirm the punching position and try to print again.124-706Cause: The settings for folding are canceledRemedy: Confirm the folding settings and try to print again.124-709Cause: The number of pages exceeds the number of pages that can be stapledRemedy: Decrease the number of pages, or cancel the stapling settings, then try toprint again.17-51Xerox® Color C75 PressUser GuideStandard/Booklet Maker Finisher