The Standard/Booklet Maker finisher is comprised of the following components:FunctionComponentNo.Contains staples; remove this cartridge to replace staplesand clear staple jams.Staple cartridge1Container for staple waste; remove this container when full.Staple waste container2The Top Tray is used for stacked output, and can receive upto 500 sheets of 20 lb./80 gsm paper. Copies are deliveredhere when specific output features are selected, such asAutomatic sorting, Collated, Uncollated, or Normal.Top tray3The Stacker Tray is used for offset and/or stapled output,and can hold up to 2000 sheets of 20 lb./80 gsm paper. Thistray also receives copies when you punch and Z-fold copies.Stacker (middle) tray4NoteBoth the Top and Stacker Trays can be used for hole punchedoutput (optional).This is available only with the Booklet Maker Finisher. TheBooklet tray receives saddle-stitched booklets when you selectSingle Fold or Single Fold + Stapling.Booklet output tray5This is available only with the Booklet Maker Finisher. Whenyou press this button, the booklet output tray is raised so youcan retrieve booklets from the output area.Booklet output tray button6Open to clear paper jams, replace staples, clear jammedstaples, or remove the scraps from the puncher.Right cover7This is available only with the Booklet Maker Finisher. Thereare two staple cartridges for the booklet. Remove this cart-ridge to replace staples and clear staple jams.Staple cartridges for book-let8Collects the scraps from the puncher. Open to remove thescraps.Punch scrap container9Xerox® Color C75 Press17-2User GuideStandard/Booklet Maker Finisher
