Power Off/On the machineIf the problem still exists, contact the Customer Support Center.049-964Cause: HCS sensor failureRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.049-965Cause: Stacker height limit or full detection faultRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.049-966Cause: Stacker height limit or full detection faultRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.049-967Cause: HCS detects paper still remaining on stacker cart after the front door wasopened/closed.Remedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Open the HCS front door.• Remove any paper from the stacker cart.• Close the HCS front door.049-968Cause: Mix size, stacker full detection faultRemedy: Perform the following:Power Off/On the machineIf the problem still exists, contact the Customer Support Center.• Open the HCS front door.• Remove any paper from the stacker cart.Xerox® Color C75 Press16-24User GuideHigh Capacity Stacker (HCS)