Error Messages 8-7Troubleshooting8#011 Check your document.Cause : The document you are sending was not placed correctly.Remedy : Place it again, and resend.#012 No paper in the remote unit.Cause : The document could not be sent because the receiving fax machine was out ofpaper.Remedy : Ask the other party to load the paper drawer.#018 Busy/No signal.Cause : The other party did not respond when your machine redialed. The documentscould not be sent because the other party was engaged. Alternatively, thesettings of your machine do not match the settings of the remote machine.Remedy : Confirm that the remote party is able to communicate, and try again.#037 The memory is full.Cause : You could not receive documents because there was no memory available.Remedy : Erase error documents or unwanted documents in order to make memoryavailable. (See ‘Erasing Received Documents from Memory,’ on p. 4-9.)#080 Subaddress TX rejected.Cause : A subaddress is not set in the remote machine.Remedy : Check the subaddress of the remote party, and try again.#081 Password TX rejected.Cause : A password is not set in the remote machine.Remedy : Check the password of the remote party, and try again.STOP (#099) CANCEL key pressed.Cause : You performed a cancel operation while communication was taking place.Remedy : Begin again.
