02/20006-18 DocuPrint N2025/N2825GP 2.5Initial IssueGeneral Procedures / InformationGP 2.5 2000 Sheet Feeder SpecificationsContents1. Specifications1.1 Equipment Components1.1.1 Basic Components1.2 Electrical Characteristics1.2.1 Power Supply1.3 Mechanical Characteristics1.3.1 Dimensions and Weight Table 1.1.4 Paper1.4.1 Paper Size1.4.2 Supported Paper1.4.3 Maximum Paper Stacking Ability1.5 Replacement Parts1.6 Environment1.6.1 Noise Level1. Specifications1.1 Equipment Components1.1.1 Basic ComponentsThe 2000 Sheet Feeder Assembly is connected to the bottom of the N2025/N2825 baseengine or 500 Sheet Feeder 2 with stud pins (2), screws (2) and a drawer connector.1.2 Electrical Characteristics1.2.1 Power Supply24V DC and 3.3V DC are supplied from the Print Engine Controller PWB directly or throughthe PWB Feeder 2.1.3 Mechanical Characteristics1.3.1 Dimensions and Weight Table 1.1.4 Paper1.4.1 Paper SizeYou can use the following paper size in the 2000 Sheet Feeder.• A4 (LEF)• LETTER (8.5"x11" LEF)1.4.2 Supported Paper64gsm ~ 200gsm1.4.3 Maximum Paper Stacking Ability2000 sheets (Xerox 4024 DP 20 lb(75gsm), RX, or FX L(64gsm))1.5 Replacement PartsThe 2000 Sheet Feeder does not have any components that need to be regularly replaced.Replace the following components as needed when they are worn out.• Roll Assembly1.6 Environment1.6.1 Noise LevelDuring printing: 53.0 dB (Print Engine +500 Sheet feeder + 2000 Sheet Feeder) 53.0 dB (PrintEngine +500 Sheet feeder + Duplex + 2000 Sheet Feeder)Table 1 Dimensions and WeightUnpackedWidth 490 mmDepth 509 mmHeight 428 mmWeight 19.0 kg
