Xerox DocuPrint N2025 Service Manual

Also see for DocuPrint N2025: Product reference guide Specification sheet User guide Supplementary guide Install guide

Contents

Xerox DocuPrint N2025 Service Manual Manual pdf 185 page image

02/20004-75DocuPrint N2025/N2825 REP 11.21, REP 11.22Repair-AdjustmentInitial IssueREP 11.21 No Paper ActuatorParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 500 Sheet Feeder (REP 11.1).2. Remove the paper tray from the feeder.3. Remove the Front Cover (REP 11.2).4. Remove the Left Cover (REP 11.3).5. Remove the 500 Sheet Feed Head Assembly (REP 11.9).6. Remove the actuator from the Feeder Chute (Figure 1). (A small screwdriver may be usedto pry the actuator free of the retaining clips.Figure 1 No Paper ActuatorReplacement1. Reinstall the components in the reverse order.REP 11.22 Preregistration SensorParts List on PL 11.2RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the printer from the 500 Sheet Feeder (REP 11.1).2. Remove the paper tray from the feeder.3. Remove the Front Cover (REP 11.2).4. Remove the Left Cover (REP 11.3).5. Remove the Feed Head Assembly (REP 11.9).6. Remove the screw that secures the sensor cover (Figure 1). Remove the cover.7. Disconnect the P/J13C from the Preregistration Sensor.8. Release the four locking tabs and remove the sensor (Figure 2).Figure 1 Sensor CoverFigure 2 Preregistration SensorReplacement1. Reinstall the components in the reverse order.