02/20004-38 DocuPrint N2025/N2825REP 7.2Initial IssueRepair-AdjustmentREP 7.2 Right Print Cartridge Guide AssemblyParts List on PL 8.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Remove the Lower Rear Cover (REP 1.7).2. Open and remove the Rear Cover (REP 1.9).3. Remove the Fuser Assembly (REP 5.1)4. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.5. Remove the Left Side Cover (REP 1.1).6. Remove the Top Cover Assembly (REP 1.3).7. Remove the HVPS Cover (REP 1.6).8. Remove the BTR Assembly (REP 7.7).9. Disconnect P/J186 (R) and P/J187 (W) from the HVPS PWB (Figure 1).10. Disconnect P/J177 and P/J178 from the Fuser Interlock Switch (Figure 1).11. Disconnect P/J162 from the LVPS PWB (Figure 1).12. Remove all disconnected harnesses from cable clamps.13. Remove the two screws that secure the right guide assembly (Figure 1).14. Guide harnesses through the printer frame as you remove the Right Print Cartridge guideAssembly from the printer.NOTE: The Pin Link is not attached to the Guide Assembly and may fall into the printerwhen the guide assembly is removed.15. Remove the Right Print Cartridge Guide Assembly and Pin Link from the printer (Figure1).Figure 1 Right Print Cartridge GuideReplacement1. Reinstall the components in the reverse order.
