02/20004-41DocuPrint N2025/N2825 REP 7.6, REP 7.7Repair-AdjustmentInitial IssueREP 7.6 Left Print Cartridge Guide AssemblyParts List on PL 8.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Open the Rear Cover.2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.3. Remove the Left Side Cover (REP 1.1).4. Remove the Top Cover Assembly (REP 1.3).5. Remove the BTR Assembly (REP 7.7).6. Remove the two screws that secure the Print Cartridge Left Guide Assembly to the printer(Figure 1).7. Remove the Print Cartridge Left Guide Assembly from the printer (Figure 1).8. Remove the Left Guide Link Assembly and Pin Link from the printer (Figure 1).Figure 1 Left Print Cartridge Guide AssemblyReplacement1. Reinstall the components in the reverse order.REP 7.7 BTR AssemblyParts List on PL 5.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.NOTE: During the following steps, do not touch the black roll part of the BTR. Oil fromyour hands can cause copy quality problems.2. Lift the orange handle on the left end of the BTR Assembly (Figure 1). Pull up on the han-dle to free the left end of the BTR.3. Use your finger to lift the right end of the BTR Assembly (Figure 1).4. Place the BTR roll on a sheet of clean paper and cover it with another sheet of paper.Figure 1 BTR AssemblyReplacement1. Reinstall the components in the reverse order.
