Xerox DocuPrint N2025 Service Manual

Also see for DocuPrint N2025: Product reference guide Specification sheet User guide Supplementary guide Install guide

Contents

Xerox DocuPrint N2025 Service Manual Manual pdf 131 page image

02/20004-21DocuPrint N2025/N2825 REP 3.5Repair-AdjustmentInitial IssueREP 3.5 Tray 1 Right Guide AssemblyParts List on PL 3.1RemovalWARNINGSwitch off the power and disconnect the Power Cord.1. Open the Rear Cover.2. Open the Top Cover and remove the Print Cartridge. Cover the cartridge to protect it fromlight.3. Remove Tray 1.4. Remove the Left Side Cover (REP 1.1).5. Remove the Top Cover Assembly (REP 1.3).6. Remove the Right Side Cover (REP 1.2).7. Remove the MBF Assembly (REP 2.1).8. Remove the Retard Chute Assembly (REP 3.1).9. Remove Front Cover (REP 1.4).10. Carefully push down on the locking tab that secures the rod to the paper level actuator(Figure 1).11. Remove the paper level assembly from the stud on the frame (Figure 1).12. Move the paper level forward to unlatch then remove from the printer (Figure 1).13. Remove the four screws that secure the Tray 1 Right Guide Assembly to the printer (Fig-ure 2).14. Use a small screwdriver to pry up on the locking tab that locks the guide assembly to thebottom of the printer (Figure 2).15. Remove the Tray 1 Right Guide Assembly.Figure 1 Paper Level Indicating ArmFigure 2 Tray 1 Right Guide AssemblyReplacement1. Reinstall the components in the reverse order.