02/20003-23DocuPrint N2025/N2825 IQ RAP 13, IQ RAP 14Image Quality Repair Analysis ProceduresInitial Issue• Check the rear chute between the Duplex Assembly and the Registration Rolls. Check forworn parts or rolls. Check for obstructions or contamination. Clean or replace as neces-sary.IQ RAP 14 Damaged PrintThe printed page comes out of the printer either wrinkled, creased, or torn (Figure 1).Figure 1 Damaged PrintInitial Actions• Check that the paper supply is dry and fresh.• Check that rollers and other components in the paper path are clean and unobstructed.• Ensure that paper is within specification.ProcedureObserve paper feed as you run a test print. The paper fed crooked.Y NReplace paper with fresh, dry standard paper. Run a Test Print. The paper is still dam-aged.Y NProblem solved.Open the Exit Assembly. Remove the Fuser Assembly. Turn the Fuser Assembly upsidedown. Rotate the fuser idler gear manually and inspect the Heat Roll. Turn the FuserAssembly right side up. Open the fuser jam access cover. Rotate the fuser idler gear man-ually and inspect the Pressure Roll. The Heat Roll and the Pressure Roll are free ofscratches and contamination.Y NClean or replace the Fuser Assembly (REP 5.1).Inspect the paper path between the feed tray and the exit tray for contamination orobstructions. The paper path is free of obstructions.Y NRemove obstructions or contamination from the paper path.Inspect all of the rolls along the paper path, between the feed tray and the exit tray, forcontamination, wear or damage. The paper path rolls are free of contamination, wear,or damage.A
