Specifying the Cutting Method for RollsSpecifying the Cutting Method for RollsHow rolls are cut after ejection varies depending on printer settings.Cutting Method Printer Setting Driver SettingAutomatic The roll is automatically cut by the Cutter Unit follow-ing printer driver settings.MediaMenu > Pa-per Details> (VariousTypes ofPaper) >CuttingModeAutomatic AutomaticCuttingYesEject (wait-ing for ink todry afterprinting)Choose this setting if you prefer not to have docu-ments dropped immediately after printing, as whenwaiting for ink to dry.To cut the roll with the Cutter Unit, press the Cut but-ton.Eject YesManual(when usingmedia thatcannot becut with theCutter Unit )Choose this setting when using media that cannot becut using the Cutter Unit.Cut each page from the roll using scissors. For con-tinuous printing (if you will cut each page later), se-lect Automatic Cutting > Yes or select Print CutGuideline.(See "Cutting Roll Paper After Printing.") ➔ P.152Manual No, Yes, PrintCut GuidelinePaper cut-ting (to havethe roll cutat yourspecifiedposition)Choose this option if you want to cut pages by press-ing Cutter Unit buttons for manual cutting after print-ing when Automatic Cutting > No is selected orPrint Cut Guideline is selected in the printer driver.Otherwise choose this option if you want to cut theroll edge after loading a roll.Cut buttonpressedYes No, Print CutGuidelineNote• Automatic and Eject are valid only when you have selected Automatic Cutting > Yes in the printer driver.• With Eject, printing does not resume after a series of jobs have been printed continuously until the roll is cut.• Eject is the preset selection in Cutting Mode for some types of paper. For this paper, we recommend keeping thepreset cutting mode.Cut rolls manually in the following cases:Eject (waiting for ink to dry after printing)Important• When cutting wide printed documents after ejection, have two people support the documents. If the paper drops, prin-ted documents may be damaged.• Do not lift the paper when holding printed documents before cutting. If the paper rises, it may affect the printing qualityor cause rough cut edges.Specifying the Cutting Method for Rolls iPF685User's GuideHandling and Use of Paper Handling rolls388Downloaded from ManualsPrinter.com Manuals
