Paper cutting (to have the roll cut at your specified position)1 Press the Feed button.2 Press the ▼ button to advance the roll to the position for cutting.3 Press the Cut button.4 Press ▲ or ▼ to select Yes, and then press the OK button.After the roll paper is cut, it is rewound automatically.Caution• If paper would be short when cut at a particular position, the roll may automatically be advanced in somecases before cutting.Cutting the Leading Edge of Roll Paper AutomaticallyCutting the Leading Edge of Roll Paper AutomaticallyIf the leading edge of the paper is cut crooked or is not cut straight when roll paper is loaded, it will not print correctly. Ifthis happens, you can cut the leading edge of the paper straight when loading a paper roll by using Trim Edge First inthe Control Panel menu.Trim Edge First offers the following options.• AutomaticIf the leading edge of the paper is cut crooked and is not cut straight when loading roll paper, cut the leading edgestraight and eject the fragment of paper to prevent printing on the platen and soiling the printer.iPF685 Cutting the Leading Edge of Roll Paper AutomaticallyUser's GuideHandling and Use of Paper Handling rolls391Downloaded from ManualsPrinter.com Manuals
