Before print jobs and maintenance that consume a lot of inkIf little ink is left, there may not be enough for large-format printing, head cleaning, and maintenance, which require alot of ink. In this case, replace or prepare to replace the Ink Tank before maintenance.If a message for ink replacement is shown on the Display ScreenWhen ink runs out, the Message Lamp flashes, a message regarding Ink Tank replacement is shown on the DisplayScreen, and printing is disabled. Replace the Ink Tank at this point.Attach the Ink Tank Cover to the printerAttach the Ink Tank Cover to the printerIf too much force is applied to the Ink Tank Cover while it is open, Ink Tank Cover may become detached from theprinter.If the Ink Tank Cover has become detached from the printer, attach it using the following procedure.Note• Although the attachment procedure describes the Ink Tank Cover on the right side of the printer, the Ink Tank Cover onthe left side can also be attached using the same procedure.1 Rotate the Ink Tank Cover attachment part and store it in the printer.iPF685 Attach the Ink Tank Cover to the printerUser's GuideMaintenance and Consumables Ink Tanks597Downloaded from ManualsPrinter.com Manuals
