4 Move the Width Guide (a) carefully to match the size of pa-per loaded.Set the Width Guide against the edge of the paper to pre-vent the paper from becoming crooked or wrinkled.5 Press the OK button.• If a print job was receivedThe printer now starts printing the print job.• If no print job was receivedA menu for selection of the type of paper is automatically shown on the Display Screen.Press ▲ or ▼ to select the type of paper, and then press the OK button.The printer now starts feeding the paper.Note• Refer to Paper Reference Guide for details on type of paper to select. (See "Displaying the Paper ReferenceGuide.") ➔ P.365Printing From a Desired Starting PointPrinting From a Desired Starting PointWhen printing inside boundaries or in other situations when you want to specify a particular position to start printingfrom, set Width Detection to Off in the printer menu for the type of paper used.Set Width Detection to Off1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-lect the Paper tab ( ).Printing From a Desired Starting Point iPF685User's GuideHandling and Use of Paper Handling sheets396Downloaded from ManualsPrinter.com Manuals
