1 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-lect the Paper tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button. The Paper Menu is displayed.3 Press ▲ or ▼ to select Paper Details, and then press the OK button.4 Press ▲ or ▼ to select the type of paper, and then press the OK button.5 Press ▲ or ▼ to select Cutting Mode, and then press the OK button.6 Press ▲ or ▼ to select Eject, and then press the OK button.7 Starts printing.When printing is finished, the printer will stop without cutting.8 Holding the printed document to prevent it from dropping, press theCut button to cut the roll.Manual (when using media that cannot be cut with the Cutter Unit )iPF685 Specifying the Cutting Method for RollsUser's GuideHandling and Use of Paper Handling rolls389Downloaded from ManualsPrinter.com Manuals
