4 Insert the Holder Stopper from the left in the Roll Holderas shown. Holding it at the position shown (b), push itfirmly in until the flange (a) of the Holder Stopper touchesthe roll. Lock the Holder Stopper lever (c) by pushing itdown toward the shaft side.Loading Rolls in the PrinterLoading Rolls in the PrinterFollow these steps to load rolls in the printer.Note• Before loading rolls, make sure the printer is clean inside the Top Cover and around the Ejection Guide. If these areasare dirty, we recommend cleaning them in advance. (See "Cleaning Inside the Top Cover.") ➔ P.6141 Press the Load button.2 Press ▲ or ▼ to select "Load Roll Paper", and then press the OK button.Note• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.iPF685 Loading Rolls in the PrinterUser's GuideHandling and Use of Paper Handling rolls375Downloaded from ManualsPrinter.com Manuals
