Setting Item Details20 mm (0.8 in) Select this when rubbing against the printhead occurs such as when using paper that tendsto curl.F Cut SpeedSelect the speed of automatic cutting, as needed. You can adjust this setting if paper is not cut well when automaticcutting is used.Setting Item DetailsPrinter Default The setting of the control panel of the printer is applied.High Speed When the Standard setting does not result in cutting the surface cleanly, select this.Standard Select this when you do not have any problems in automatic cutting.Low Speed This helps prevent adhesive from sticking to the cutter and keeps the cutter sharp if you se-lect it when using adhesive paper.G MirrorSpecify whether to print a mirror image, as needed. Select this option to print a version of the document or image withthe left and right sides inverted.View Settings Dialog Box for the Printing ApplicationView Settings Dialog Box for the Printing ApplicationIn the View Settings dialog box, you can check details of the selected printing application.Note• To display the View Settings dialog box, on the Main sheet, click View Settings by Print Target. (See "MainSheet .") ➔ P.167• A Print TargetShows all Print Target options (settings items for the printing application).• B NameIdentifies the item selected in Print Target by its name and an icon.• C DetailsHere, you can confirm detailed settings values for each listed item for the selected Print Target.Color Adjustment Sheet: ColorColor Adjustment Sheet: ColorIf the color tone as printed is not as you expected, you can adjust it on the Color Adjustment sheet.View Settings Dialog Box for the Printing Application iPF685User's GuideWindows Software Printer Driver172Downloaded from ManualsPrinter.com Manuals
