Note• If the Tab Selection screen is not displayed, press the Menu button.2 Press the OK button.The Set./Adj. Menu is displayed.3 Press ▲ or ▼ to select Adj. Fine Feed, and then press the OK button.4 Press ▲ or ▼ to select a setting value in the range -5 to 5, and then press the OK button.At this time, if banding in dark colors appears, select a setting value in the range 1 to 5, and if banding in lightcolors appears, select a setting value in the range -1 to -5.Adjusting Line LengthAdjusting Line LengthTo ensure that lines in CAD drawings are printed at exactly the right length, use Adjust Length to adjust the amountthat paper is advanced.There are two options in Adjust Length : AdjustmentPrint and Change Settings.• AdjustmentPrintAfter a test pattern is printed, you will measure the discrepancy based on the results of printing.• Change SettingsNo test pattern is printed. Instead, you will measure a document already printed to determine the discrepancy.Additionally, two modes are available in both AdjustmentPrint and Change Settings : A:High or B:Standard/Draft.Choose the mode that suits your particular printing application.• A:HighThis setting is applied when Highest or High is selected in Print Quality in the printer driver.• B:Standard/DraftThis setting is applied when Standard or Fast is selected in Print Quality in the printer driver.Note• Always check the Adj. Priority values before using Adjust Length. (See "Selecting a Feed Amount Adjustment Meth-od.") ➔ P.581• Use paper of the same type and size for adjustment as you will use for printing.Paper to PrepareWhen Using Rolls • An unused roll at least 10 inches wide• High-precision rulerWhen Using Sheets • One sheet of unused paper of at least A4/Letter size• High-precision rulerPerform adjustment as follows.1 Load the paper.• Attaching the Roll Holder to Rolls ➔P.372• Loading Rolls in the Printer ➔P.375• Loading Sheets in the Printer ➔P.394Important• Always make sure the loaded paper matches the type of paper specified. Adjustment cannot be completedcorrectly unless the loaded paper matches the settings.Adjusting Line Length iPF685User's GuideAdjustments for Better Print Quality Adjusting the feed amount586Downloaded from ManualsPrinter.com Manuals
