Messages regarding printing or adjustmentMessages regarding printing or adjustmentCannot adjust printhead. ..................................................................................................................................................... 672Borderless printng not possible. ...................................................................................................................................... 667Cannot adjust paper feed. .................................................................................................................................................. 671Check printed document. ................................................................................................................................................... 671Cannot adjust paper feed.Cannot adjust paper feed.Cause Corrective ActionThe Printhead nozzles are clogged. Execute Adj. Quality again, as follows.1. Press the OK button to clear the error.2. Print a test pattern to check the nozzles.(See "Checking for Nozzle Clogging.") ➔ P.5993. Clean the Printhead if the nozzles are clogged.(See "Cleaning the Printhead.") ➔ P.6004. Execute Adj. Quality again.(See "Automatic Banding Adjustment.") ➔ P.582Highly transparent film is loaded that cannot be usedfor automatic feed amount adjustment.Press the OK button to clear the error, and then adjust the feed amount manually.(See "Manual Banding Adjustment.") ➔ P.584Check printed document.Check printed document.Cause Corrective ActionThe Printhead nozzles are becoming clogged. If printing is faint, clean the Printhead.(See "Cleaning the Printhead.") ➔ P.600iPF685 Cannot adjust paper feed.User's GuideError Message Messages regarding printing or adjustment671Downloaded from ManualsPrinter.com Manuals
