8 After confirming that D Easy Settings is selected, click CAD (Color Line Drawing) or CAD (MonochromeLine Drawing ) in the E Print Target list.Note• You can check the settings values selected in the E Print Target list by clicking G View set..9 Make your selection in the F Print Quality list.10 Access the Page Setup pane.11 Select and click a roll paper in the A Paper Source list.12 Select the paper width of the roll loaded in the printer for B Roll Width. In this case, ISO A2/A3 (420.0mm) isselected.13 Specify additional printing conditions.For details on available printing conditions, see "Printer Driver Settings ." ➔P.27814 Confirm the print settings, and then click M Print to start printing.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.281• You can conserve roll paper by configuring settings suitable for the document.For details on how to conserve paper and print, see "Conserving Roll Paper by Rotating Originals 90 De-grees ." ➔ P.136Printing from AutoCADPrinting from AutoCADPrinter Driver Optimization Module for AutoCAD is software for printing optimally from AutoCAD with the printer driver.By optimally controlling the processing resolution of raster data and the memory to be used in image processing ofAutoCAD, printing superior in reliability and productivity is realized.If you install Printer Driver Optimization Module for AutoCAD on a computer on which supported AutoCAD is installed,it will be installed automatically.Note• Printer Driver Optimization Module for AutoCAD is applied automatically when you print from AutoCAD, and optimalprinting is performed.iPF685 Printing from AutoCADUser's GuideEnhanced Printing Options Printing CAD Drawings47Downloaded from ManualsPrinter.com Manuals
