8 Pull the Release Lever forward.Roll paper cannot be inserted into the Paper Feed SlotRoll paper cannot be inserted into the Paper Feed SlotCause Corrective ActionThe roll paper is warped. Straighten out curls and reload the roll.Paper is jammed by the paper feed slot. Remove the jammed paper.(See "Clearing Jammed Roll Paper.") ➔ P.629(See "Clearing a Jammed Sheet.") ➔ P.632The paper source selection is incorrect. Press the Load button and select the paper source.Cannot load sheetsCannot load sheetsCause Corrective ActionThe paper source selection is incorrect. Press the Load button and select the paper source.Paper is not cut neatlyPaper is not cut neatlyCause Corrective ActionThe paper is bent or curled at the cut position. Straighten out any curling by the edges of the paper.Paper rises by the ends of the cut position beforeit is cut.Reload the paper correctly.You are using paper that cannot be cut with theCutter Unit.Specify Manual in Cutting Mode in the Control Panel menu and use scissors or acutting tool to cut the roll after printing.(See "Specifying the Cutting Method for Rolls.") ➔ P.388Cut Speed is not configured correctly in the Con-trol Panel menu.Change the Cut Speed setting in the Control Panel menu.(See "Menu Structure.") ➔ P.452During cutting, printed documents fall out at anangle.In the Control Panel menu, set Cutting Mode to Eject. Hold documents after print-ing, as they are cut.(See "Specifying the Cutting Method for Rolls.") ➔ P.388Paper is not cutPaper is not cutCause Corrective ActionIn the printer driver, No or Print Cut Guideline is specified in Au-tomatic Cutting.Specify Yes in Automatic Cutting in the printer driver.(See "Page Setup Sheet (Windows).") ➔ P.178(See "Paper Detailed Settings Dialog Box (Mac OS).") ➔ P.286In the Control Panel menu, Cutting Mode is set to Eject or Man-ual.If the Cutting Mode is Eject, press the Cut button to cut the paper.If the Cutting Mode is Manual, cut rolls with scissors or the like.(See "Specifying the Cutting Method for Rolls.") ➔ P.388iPF685 Roll paper cannot be inserted into the Paper Feed SlotUser's GuideTroubleshooting Problems Regarding Paper637Downloaded from ManualsPrinter.com Manuals
