Depression on the leading edge is leftDepression on the leading edge is leftCause Corrective ActionKeeping a roll in the printer for a long timewithout printing on it may leave a depressionon the leading edge.When printing quality is most important, we recommend setting TrimEdge Reload to Onor Automatic so that the paper edge is automatically cut before printing.(See "Menu Structure.") ➔ P.452The size of clear film cannot be detectedThe size of clear film cannot be detectedCause Corrective ActionThe Platen is soiled with ink or other substances. Open the Top Cover and clean the entire Platen.(See "Cleaning Inside the Top Cover.") ➔ P.614Roll Paper is Continuously EjectedRoll Paper is Continuously EjectedCause Corrective ActionAlthough sheets are se-lected as the papersource, a roll was ad-vanced.After roll ejection stops, follow these steps to reload the roll.1. Push the Release Lever back.2. Open the Roll Cover.3. Using both hands, rotate the Roll Holder toward the back to rewind the roll. At this time, ensure that bothends of the roll are rewound evenly.4. Pull the Release Lever forward.5. Load the roll. At this time, be sure to press the Load button and select "Load Roll Paper".(See "Loading Rolls in the Printer.") ➔ P.375Depression on the leading edge is left iPF685User's GuideTroubleshooting Problems Regarding Paper638Downloaded from ManualsPrinter.com Manuals
