Handling sheetsHandling sheetsLoading Sheets in the Printer ........................................................................................................................................... 394Changing the Type of Paper .............................................................................................................................................. 378Printing From a Desired Starting Point ......................................................................................................................... 396Removing Sheets .................................................................................................................................................................... 399➔ Clearing a Jammed Sheet ............................................................................................................................................ 632➔ Clearing Jammed Paper (Paper Feed Slot) .......................................................................................................... 635Loading Sheets in the PrinterLoading Sheets in the PrinterFollow these steps to load sheets in the printer.Important• One sheet of paper can be loaded in the Paper Feed Slot at a time. Do not load more than one sheet at a time. Thismay cause paper jams.• Before feeding paper or printing, make sure the sheet is flat against the Roll Cover. The sheet may jam if it curlsbefore feeding or printing and the trailing edge drops toward the front.• Paper that is wrinkled or warped may jam. If necessary, straighten the paper and reload it.• Load the paper straight. Loading paper askew will cause an error. (See "Paper is crooked..") ➔ P.665Note• Store unused paper in the original package, away from high temperature, humidity, and direct sunlight.1 Select sheets as the paper source.• If a print job was receivedSheets are automatically selected, and the media type and size specified by the print job are shown on theDisplay Screen. Go to the next step.• If no print job was received1. Press the Load button.2. Press ▲ or ▼ to select "Load Cut Sheet", and then press the OK button.Note• If any paper has been advanced that will not be used, a message is shown requesting you to remove it.Press ▲ or ▼ to select Yes, and then press the OK button. Remove the paper and go to the next step.Loading Sheets in the Printer iPF685User's GuideHandling and Use of Paper Handling sheets394Downloaded from ManualsPrinter.com Manuals
