Cause Corrective ActionWhen Detect Mismatch in the Control Panelmenu is set to Pause, the type of paper loadeddoes not match the type specified in the printerdriver.2. Replace the loaded paper with paper of the type and size you have specified inthe printer driver.(See "Loading and Printing on Rolls.") ➔ P.19(See "Loading and Printing on Sheets.") ➔ P.21Press ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.When Detect Mismatch in the Control Panelmenu is set to Warning, the type of paper loadeddoes not match the type specified in the printerdriver.You can continue to print, but note that this error may cause paper jams or problemsin the printing results.The paper is too small.The paper is too small.Cause Corrective ActionWhen Detect Mismatch in the Control Panelmenu is set to Pause, paper smaller than thesize specified in the printer driver is loaded.Press ▲ or ▼ to select Print, and then press the OK button to resume printing.However, note that this error may cause paper jams and affect the printing quality.Adjust the paper size setting in the printer driver to match the size loaded in the printeras follows.1. Press ▲ or ▼ to select Stop Printing, and then press the OK button.2. Change the paper size setting in the printer driver to the size loaded in the printerand try printing again.Replace the loaded paper with paper of a size that matches the size setting in theprinter driver as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button to stopprinting.2. Replace the loaded paper to match the settings in the printer driver and try printingagain.(See "Loading and Printing on Rolls.") ➔ P.19(See "Loading and Printing on Sheets.") ➔ P.21When Detect Mismatch in the Control Panelmenu is set to Warning, paper smaller than thesize specified in the printer driver is loaded.You can continue to print, but note that this error may cause problems in the printingresults.The paper is too small.The paper is too small."Replace paper with A4/LTR (vertical) or larger"Cause Corrective ActionThe loaded paper is too small. Replace the paper with paper of A4/Letter (vertical) size or larger as follows.1. Press ▲ or ▼ to select Change Paper, press the OK button, and remove the paper.(See "Removing Sheets.") ➔ P.3992. Switch to paper A4/Letter (vertical) or larger.(See "Loading and Printing on Sheets.") ➔ P.21The printer will resume printing.Press ▲ or ▼ to select Stop Printing, and then press the OK button."Replace roll with 10 in. wide or larger roll."Cause Corrective ActionThe loaded paper is too small. Replace the roll with a roll 10 inches in width or larger as follows.1. Press ▲ or ▼ to select Change Paper, and then press the OK button.iPF685 The paper is too small.User's GuideError Message Messages regarding paper661Downloaded from ManualsPrinter.com Manuals
