StandStandWhen using an optional Stand, you can store and stack documents printed on rolls.• Printer Stand ST-27a Accessory PocketStores printer accessories.b Output StackerPrinted documents are ejected into the output tray.c Locking CasterLock to immobilize the caster.Before moving the printer, always unlock all four casters. Moving the printer while casters are locked mayscratch the casters or the floor.d Adjustable StopperPull out depending on the paper size when using the output stacker in the Extended position A.For details on the extended position, see "Using the Output Stacker." ➔P.401e Paper GuideGuides printed documents into the output stacker.f Output stacker handleThis handle is grasped and supports the sliding output stacker when putting the output stacker into Extendedposition B and returning it to the regular position.For details on the extended position, see "Using the Output Stacker." ➔P.401g Output stacker release leverPull this lever towards you to release Extended position B.For details on the extended position, see "Using the Output Stacker." ➔P.401h Output Stacker Ejection GuidesThis guide supports the paper that is output when using the output stacker in Extended position B.Note• The Stand is normally offered as an optional accessory, but it may be provided as a standard accessory in some salesregions.• For details on the extended position, see "Using the Output Stacker." ➔ P.401iPF685 StandUser's GuidePrinter Parts Optional accessories489Downloaded from ManualsPrinter.com Manuals
