HP-GL/2 jobs are printed in monochrome (or color)HP-GL/2 jobs are printed in monochrome (or color)Cause Corrective ActionThe Color Mode setting in theControl Panel menu is incorrect.Check the Color Mode setting in the Control Panel menu.(See "Menu Settings.") ➔ P.459However, for optimal Printhead performance, the printer consumes trace amounts of color ink evenwhen Monochrome is selected as Color Mode.Printed colors of lines are inaccurate during HP-GL/2 printingPrinted colors of lines are inaccurate during HP-GL/2 printingCause Corrective ActionAdjustFaintLines is On in the Con-trol Panel menu.Setting AdjustFaintLines to Off in the Control Panel menu may help produce the expected re-sults. However, lines in some colors may appear broken.HP-GL/2 jobs are printed 6 mm larger than specifiedHP-GL/2 jobs are printed 6 mm larger than specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created in the source application, is incor-rect.In the Control Panel menu, set Oversize to Off.(See "Menu Settings.") ➔ P.459HP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedHP-GL/2 jobs are printed at maximum size, even if a standard size is specifiedCause Corrective ActionThe page size of the HP-GL/2 print job, as created in thesource application, is incorrect.Set Detect img size to Command priority or Detected size in the Con-trol Panel menu.(See "Menu Settings.") ➔ P.459Set Conserve Paper to On in the Control Panel menu.(See "Menu Settings.") ➔ P.459HP-GL/2 printing takes a long timeHP-GL/2 printing takes a long timeCause Corrective ActionLarge print jobs with a lot of data take longer to print. Please wait a while until printing is finished.A job was printed when Input Resolution in the ControlPanel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and printagain.(See "Menu Settings.") ➔ P.459The printer stops when printing a HP-GL/2 job (the carriage stops moving)The printer stops when printing a HP-GL/2 job (the carriage stops moving)Cause Corrective ActionThe printer is analyzing the print job. Please wait a while until printing is finished.A job was printed when Input Resolution in the ControlPanel menu was set to 600dpi.In the Control Panel menu, set Input Resolution to 300dpi and print again.(See "Menu Settings.") ➔ P.459HP-GL/2 jobs are printed in monochrome (or color) iPF685User's GuideTroubleshooting HP-GL/2 problems652Downloaded from ManualsPrinter.com Manuals
