6 Click the Page Setup tab to display the Page Setupsheet.7 Select and click a roll paper in the L Paper Source list.8 Select the width of the loaded roll in the M Roll Paper Width list—in this case, ISO A2/A3 Roll (420.0mm).9 In the A Page Size list, click the size of the original as specified in the application. In this case, click ISO A4.10 Select the C Enlarged/Reduced Printing check box.11 Click ISO A4 in the G Paper Size list.12 Click F Scaling and enter 120.Note• You can specify enlargement that exceeds the paper size, but in this case, the portions off the bottom andright edges of the paper will not be printed.• If the original size after enlargement or reduction issmaller than the paper size, the original is printed in theupper-left corner. In this case, you can center originalsby selecting E Print Centered on the Layout sheet.13 Confirm the print settings and print as desired.Note• For tips on confirming print settings, see "Confirming Print Settings ." ➔ P.161Resizing Originals by Entering a Scaling Value (Mac OS)Resizing Originals by Entering a Scaling Value (Mac OS)This topic describes how to enlarge originals before printing by entering a scaling value, based on the following exam-ple.• Document: Any TypeiPF685 Resizing Originals by Entering a Scaling Value (Mac OS)User's GuideEnhanced Printing Options Printing enlargements or reductions73Downloaded from ManualsPrinter.com Manuals
