Other MaintenanceOther MaintenancePreparing to Transfer the Printer .................................................................................................................................... 618Reinstalling the Printer ......................................................................................................................................................... 621Updating the Firmware ........................................................................................................................................................ 625Preparing to Transfer the PrinterPreparing to Transfer the PrinterTo protect the internal parts in transit, always follow these steps before transferring the printer to a new location.Refer to the Setup Guide for details on packing the printer and installing it after transfer.Important• Avoid tilting the printer excessively in transit. This may cause ink in the printer to leak and cause stains.Note• When you execute prepare to transfer, ink is drawn into the Maintenance Cartridge. Depending on the amount of freespace in the mounted Maintenance Cartridge, you may need to replace it with a new one at this time.Note that replacement is not required if there is 80% or more free space. (See "Checking the Remaining MaintenanceCartridge Capacity.") ➔ P.612• Depending on the state of the printer, part replacement may be necessary when preparing to transfer the printer (thatis, when you execute the printer menu item to prepare for transfer).Remove paper1 Remove the paper.• Rolls (See "Removing the Roll from the Printer.") ➔P.380• Sheets (See "Removing Sheets.") ➔P.399Access the Prep.MovePrinter menu1 If a message instructing you to replace the Maintenance Cartridge is displayed on the Display Screen, replacethe Maintenance Cartridge.(See "Replacing the Maintenance Cartridge.") ➔P.6082 On the Tab Selection screen of the Control Panel, press ◀ or ▶ to se-lect the Settings/Adj. tab ( ).Note• If the Tab Selection screen is not displayed, press the Menu button.3 Press the OK button.The Set./Adj. Menu is displayed.4 Press ▲ or ▼ to select Prep.MovePrinter, and then press the OK button.Preparing to Transfer the Printer iPF685User's GuideMaintenance and Consumables Other Maintenance618Downloaded from ManualsPrinter.com Manuals
