99Sub monitor (monitor for display of live images only)Important:• Configuration and operation of the recorder from the sub monitor is not possible.Live images from the specified cameras can be displayed on 1-screen or 4-screen/9-screen/16-screen/32-screenon the sub monitor. When several cameras are selected on 1-screen or 4-screen/9-screen/16-screen, cameraimages will be switched sequentially at the selected switching interval (sequence display). In addition, cameraimages can be switched according to the signal input triggered by a terminal alarm. (☞ Page 47)Note:• The date & time and camera also appear on the camera image displayed on the sub monitor, but somecharacters may be cut off.• To display images, it is necessary to select the cameras to be displayed in the setup menu in advance. Therecorder is not configured to display camera images by default.• Depending on the selected switching interval, a black screen may appear before camera images are dis-played.• When the secret view function is selected, the single screen on the main monitor or selected images on amultiscreen will not be displayed.• While "1-screen live sequence" is being performed, the secret view images will be skipped (not displayed).• The image of a camera where an error has occurred will not be displayed.• The size of displayed images will be fit into the screen regardless of the aspect ratio at the default setting.When the aspect ratio of the sub monitor (BNC) is 4:3, the vertically long images will be displayed comparedwith the images of the sub monitor (HDMI).• Depending on whether enabling or disabling the re-encoding transmission, the frame rate or the resolutionof camera images on the sub monitor may vary, or the sub monitor may momentarily go black.[Operation via recorder's main monitor]
