110Display images from cameras on a multiscreenLive images from cameras can be displayed on a multiscreen.Displaying images on a control screenStep 1Click one of the [Multiscreen select] buttons.→ Live images from cameras will be displayed on amulti-screen.Displaying images on a control screen• 4-Screen buttonDisplays images on the 4-screen including theselected camera. Each click of a button switchesto the next 4 screens in the sequence: camera 1to 4 → camera 5 to 8 → camera 9 to 12 → cam-era 13 to 16.• 9-Screen buttonDisplays images on the 9-screen including theselected camera. Each click of a button switchesto the next 9 screens in the sequence: camera 1to 9 → camera 10 to 18 → camera 19 to 27.• 16-Screen buttonDisplays images on the 16-screen including theselected camera. Each click of a button switchesto the next 16 screens in the sequence: camera 1to 16 → camera 17 to 32 → camera 33 to 48.Note:• After having switched from multiscreen to1-screen display, double-clicking the image dis-play area will display the multiscreen displayedbefore switching screens.• It is also possible to switch the images displayedon the 4-screen/9-Screen/16-Screen by clickingthe camera number panel with the 4-screen/9-Screen/16-Screen displayed. (When the panel ofcamera 5 is clicked with the 1- to 4-screen dis-played, the images of camera 5 to 8 will be dis-played)• The audio of the selected camera will be output.(It is possible to fix audio to be output on "Audiooutput camera" under "Advanced setup" under"Monitor".)• At the default, black zones will be displayed onthe top and bottom of images with the aspectratio of 16:9. Refer to page 46 for the setting toenlarge the vertical size of displayed images.Displaying images on a wide viewStep 1Click one of the [Multiscreen select] buttons.→ Live images from cameras will be displayed on amultiscreen.[Multiscreen select] button of the wide view screenNote:• Cameras displayed on the multiscreen can bechanged. Read Step 2 described in "Displayingimages on a wide view" of "1-screen display".• Clicking the sequence button can switch cameraimages automatically (live sequence display). Thesettings related to the live sequence display canbe performed at "Live sequence (Wide view)" of[Monitor]-[Main monitor].• The audio of the camera assigned to the top leftposition will be output. (It is possible to fix audioto be output on "Audio output camera" under"Advanced setup" under "Monitor".)[Operation via recorder's main monitor]
