113Operate the cameraWhen displaying live images from a camera with the panning/tilting function on a 1-screen or 4-screen, the fol-lowing camera operations are available.Note:• It may be impossible to operate the camera or some functions may be inoperable depending on the modelof the camera.• Operations are performed from the operation window. When working with the wide view screen, open a1-screen or 4-screen operation window by clicking the [Ctrl screen] button in the bottom right corner of thescreen.• For a fixed camera, the buttons on the camera control panel and other controls will be disabled.Camera control panelOperate the cameras displayed as selected (inside selection frame) in the image display area. On the 1-screen,the camera whose image is currently displayed, can be operated. On the 4-screen, click the camera numberpanel on the operation panel, or select a camera image by clicking it in the image display area.Control buttonsControl buttonsMove (pan/tilt) the camera in the clicked direction.Keeping the button pressed will move the cameracontinuously.[Zoom] buttonAdjusts the zoom factor.[Home position/Call] buttonMove the camera to the home position.[Enable camera control with mouse] checkboxWhen this item is checked, pan/tilt (clicking) andzoom (mouse wheel) can be controlled with themouse on the selected camera image.Note:• When this checkbox is marked, digital zooming(☞ Page 111) by turning the mouse wheel opera-tion is not possible. When the camera controlpanel is inoperable for the fixed camera, the dig-ital zoom can be performed by turning the mousewheel even when the checkbox is checked.[Detail] buttonDisplay the "Camera control [Advanced]" panel, andperform any of the following camera operations.[Focus] buttonAdjust the focal point.[Brightness] buttonAdjusts the lens iris of the camera.Auto modeActivates the auto mode function of the camera.[Operation via recorder's main monitor]
