100Basic operationsTo operate, use the mouse connected to the recorder to move the mouse cursor displayed on the main monitorand left-click the buttons or tabs displayed on the screen. (Hereinafter, "Left-click..." will be described as"Click..." in this document.)In lines where the [▲]/[▼] buttons are displayed, the value on which the cursor is placed can be changed byturning the mouse wheel. For example, when setting date & time, the hours, minutes and seconds can bechanged.The shape of the mouse cursor will change as follows depending on the display screen and mouse operation.: Normal operation: When dragging a camera number panel (wide view screen)Note:• When no operation is made for 10 seconds or more, the mouse cursor will be hidden. The mouse cursor willbe displayed again when the mouse is moved.• It is impossible to connect a mouse to the mouse connection port if the connector from the mouse is upsidedown. When it is hard to connect, check the upside down position of the connector.About the operation of on-screen keyboardSetting items can be entered using the on-screen keyboard. When clicking the [ ] icon beside the entry field,the on-screen keyboard will be displayed, and it will become possible to enter characters by clicking the char-acter keys on the keyboard.On-screen keyboard screen[Del all] buttonDeletes all the characters in the entry field.[←]/[→] buttonMove the cursor in the entry field to either direction.[Delete] buttonDeletes a character pointed by the cursor in the entryfield.[A/a] buttonThis button changes the characters to be enteredbetween capital letters and small letters.Entry fieldLanguage selection pull-down menuClick the [▼] button to select the language forcharacter entry.[Operation via recorder's main monitor]
