56Configure the settings relating to the usermanagement [User management]The settings such as user authentication On/Off, administrator registration and operation levels can be config-ured on the setup menu - the "Advanced setup" menu - the "User management" page.The "User management" page has [Basic], [User registration] , [Administrator setup] and [Host registration] tabs.Configure the basic settings relating to user management[Basic]The settings relating to login when using the mouse, user authentication for network operations, and user levelscan be configured on this tab.■ OperationConfigure the settings to enable auto login when turn-ing on the recorder.[Auto login]Select "On" or "Off" to determine whether or not toactivate the auto login function.On: Logs in to the recorder automatically.Off: Does not log in to the recorder automatically.Login is required when operating the recorderfrom the logout status.Default: On[Auto login user]When "On" is selected for "Auto login", the users reg-istered as auto login users in this setting can log in tothe recorder automatically. An auto login user shouldbe one of the users registered in the recorder.Default: (Administrator)[Quick login]Select "On" or "Off" to determine whether to enter orselect the user name.Off: User name needs to be entered.On: Login by selecting a displayed user name.Default: Off[Auto logout]Set the time to wait until auto logout when no opera-tions are made while displaying live images.Off: Does not logout to the recorder automati-cally.After 1 min/ After 3 mins/ After 5 mins/After 30 minsDefault: OffNote:• When "On" is selected for "Auto login", the userwill not be logged out automatically even if othervalues than "Off" is selected for "Auto logout".When logout is performed (☞ Page 101), loginwill be automatically performed by the user regis-tered in "Auto login user".• To prevent inappropriate operations, it is recom-mended to select settings other than "Off" for"Auto logout".■ NetworkDetermine whether or not to require user authentica-tion for operating the recorder from a PC.[User authentication]Select "On" or "Off" to determine whether or not toauthenticate the user.On: Login followed by user authenticationOff: Login without user authenticationDefault: On[Host authentication]Determine whether to enable or disable the hostauthentication.On: Login followed by host authentication.Off: Login without the host authentication.Default: Off[Setup via recorder's main monitor]
