127Play recorded imagesDisplay the images recorded on the recorder’s hard disk on the main monitor.Playback operation can be made while recording. Playback of images can be controlled from the operation dis-play area or the wide view.Refer to page 132 and following pages for playback operation.Note:• Images can be played on 1-screen and 4-screen in the control screen. When the sub-stream recording isset, the image can be played on 9-screen and 16-screen also (Except cameras which record images asJPEG).• Images can be played back on 1-screen to 4-screen in the wide view. When the sub-stream recording isset, images can be played on up to 16-screen (Except cameras which record images as JPEG).• The audio of the displayed image is output on 1-screen display and the audio of the selected camera is out-put on multi-screen display of the control screen.• The audio of the top-left camera on the screen is output during the wide view.• No audio will be output when playing back in fast forward/fast reverse.• The camera image can be changed by clicking the camera number (1 to 64) during playback.• The Multiscreen select button, digital zoom button, Mute button and OSD button remain effective duringplayback. Refer to "Monitor live images" (☞ Page 103) for further information.• When displaying images recorded at the following setting values of resolution and frame rate on each seg-ment of a multiscreen, the images will be played back with the selected refresh interval.【No sub-monitor display nor re-encoding transmission】DisplayMultiscreen display 3-screen/4-screenHD(1280×720)FHD(1920×1080) 50 ips or higher【Sub monitor display or re-encoding transmission enabled】DisplayMultiscreen display 3-screen/4-screenHD(1280×720)FHD(1920×1080) 50 ips or higherQXGA(2048×1530) ~ 9M(2992×2992) 25 ips or higher12M(4000×3000) 10 ips or higher (H.264/H.265)Display not available (MJPEG)HDDRecorderMain monitorImage data[Operation via recorder's main monitor]
