132Play images from a designated pointIt is possible to start playback from a designated date & time or the latest recorded image.Play image recorded at a designated date & timeStart playback by designating the date & time of a recorded image on the date & time operation panel.Date & time operation panel (normal display)Step 1Click the [▲]/[▼] button in the [Playback] box to setthe date & time to be played.Step 2Select the month from the calendar in which date &time of the image to play back is included.Click the [<>] button to change the year andthe [] button to change the month.Note:• The current date is displayed in aqua.• The date on which the recorded image is storedon the HDD will be displayed in white.Step 3Click the date & time of the image to play back fromthe calendar.→ The frame around the selected date turns green,and playback starts at the designated date &time.The date & time operation panel will turn to theplayback display (☞ Page 134) and the playbackoperation panel will be displayed on lower sectionof the date & time operation panel (☞ Page 129).Note:• Unless you want to change the date & time on thecalendar, click the playback button.Step 4To stop playback and return to live images, click the[Live] button or the stop button on the playback oper-ation panel.→ Playback will stop, and live images will be dis-played.Note:• Playback can also be stopped and live imagescan also be displayed by the following operations:• Clicking the [×] button on the date & timeoperation panel (playback display)• Changing the playback medium• When there is no image stored under the entereddate & time, proceed as follows:• When there are images recorded after the des-ignated date & time, the oldest image recordedafter the designated date & time will be played.• When there are no images recorded after thedesignated date & time, the newest imagerecorded before the designated date & timewill be played.Playback button Calendar[Operation via recorder's main monitor]
