158List display areaTotal: Displays the total number of listed data.No: The number will be displayed in the order ofoccurrence.Date & Time: Date & time when an event or troubleoccurred will be displayed.Log: Details of the occurred event are displayed.The following are the maximum number of logsthat can be saved. When the number of logsexceeds the limit, the older logs will be overwrit-ten by the newer logs. In this case, the oldest logis the first to be overwritten.Alarm log: Up to 1000Error log: Up to 1000Clicking date & time in the list can start playback fromthat date & time. (When clicking date & time in the loginformation, playback will be started from a pointapprox. 5 seconds before the date & time selected.)To display search results or a list of copied data, referto "Search and play recording events" (☞ Page 173)and "Check a list of copied recorded images" (☞ Page180), respectively.Note:• To start playback from the beginning of the pre-event recording when the "Pre-event duration"setting is longer than 5 seconds, click the play-back button, and then click the previous recordbutton.• The corresponding recorded data that is displayedin the selected log list cannot be played if the datahas already been overwritten or erased.Camera selection panelClicking the [Cam. select] tab will display the operation panel shown below. Switch the image display area andselect camera images.Camera selection boxFor the [Multiscreen] box, [Wide view] box and [Digital zoom] box, refer to "Control Panel" (☞ Page 157).Camera selection boxClicking the camera title will display images from theselected camera on a 1-screen in the image displayarea. Setting the [Group display] of [Monitor] - [Webbrowser] to "On" (☞ Page 157) enables the groupdisplay of cameras.[Operation via PC web browser]
