111Use digital zoomImages on the 1-screen or 4-screen of the control screen, or the 1-screen in wide view can be digitally zoomed.It is also possible to move the zoomed area within the displayed image.Displaying images on a control screenNote:• Digital zoom is not available on the 9-screen/16-screen.• To use this function on the 4-screen, do so after first selecting the desired camera image. To select a cam-era, click the camera number panel or the camera image. Once a camera has been selected, the selectionframe will be displayed around the camera image.Step 1Confirm that the image display area is displayed onthe 1-screen or 4-screen.(when displaying on the 4-screen, select the camerawhose image is to be zoomed)Step 2Click the digital zoom buttons .→ The displayed image will be enlarged ×1, ×1.25,×1.50, ×1.75, ×2, ×2.5, ×3, ×3.5, ×4, ×5, ×6, ×7, ×8centering on the center point of the screen.Digital zoom buttonsNote:• Clicking a point in the zoomed image makes theclicked point the center of the image.• If "Enable camera control with mouse" on thecamera control panel (☞ Page 113) is notchecked, the digital zoom factor can also bechanged by placing the cursor on the image in theimage display area and turning the mouse wheel.In this case, the point where the mouse cursor ispositioned will become the zoom center.• If the image resolution is too small compared withthe size of the image display area, the digital zoomlevels off and the image cannot be displayed at theassigned magnification.Step 3Click the digital zoom button to zoom out theimage by the magnification opposite to the Step 2.Note:• Digital zoom is automatically canceled by otheroperations such as selecting another camera orchanging the screen pattern.Displaying images on a wide viewStep 1Confirm that the image display area is set to the1-screen.Step 2Use the mouse wheel.→ Zooming is switched by ×0.25 from ×1 to ×2, by×0.5 from ×2 to ×4 and by ×1 from ×4 to ×8 cen-tering the position of the mouse cursor.Click of the image during zoom display changes thecenter to the clicked position.Note:• The magnification is displayed around the cameratitle during the zoom display. If the camera title isnot displayed, the zoom magnification will not bedisplayed. You can set whether to display thecamera title in the [Main monitor] tab of the moni-tor page. (☞ Page 45)• Digital zoom is automatically canceled by otheroperations such as selecting another camera orchanging the screen pattern.• If the image resolution is too small compared withthe size of the image display area, the digital zoomlevels off and the image cannot be displayed at theassigned magnification.[Operation via recorder's main monitor]
