Panasonic WJ-NX400K Operating Instructions Manual

Also see for WJ-NX400K: Installation guide Important information Installation guide Important information Operating instructions

Contents

Panasonic WJ-NX400K Operating Instructions Manual Manual pdf 11 page image

11Camera setup [Camera]The "Camera" page has the [Camera registration] tab, the [Camera setup] tab and the [Advanced setup] tab.[Camera registration] tabPerform settings such as the network settings of the camera (IP address and port number), and the displayposition on the main monitor.When performing the initial settings, displays camera information detected/set on the "Easy Start".[Detect cameras]The cameras connected to a network can bedetected for registration. (☞ Page 12)[Management of camera user]Set a user name/password of the camera in the camera.(☞ Page 18)[Registered information]Change the "Model", "Option", "Address" and "Com-pression".When the [Setup >] button is clicked, the "Registeredinformation" window opens to edit the settings.(☞ Page 14)In the event of communication trouble with the cam-era, one of the following error messages is displayedfor "Error information".Connection error: The communication with thecamera disconnected.Authentication error: The user authentication ofthe camera failed.Camera error: The response from the camera isincorrect.Note:• When an error message is displayed, check thecamera connections and settings (☞ operatinginstructions of the camera). If the problem cannotbe solved, refer to "Easy Start" of InstallationGuide and register the camera again.[Change the display position of camera]The camera numbers can be interchanged. When the[Setup >] button is clicked, the "Change the displayposition of camera" window opens to edit the set-tings. (☞ Page 15)[Setup via recorder's main monitor]