125Cancel the alarm actionThe recorder will take an alarm action according to the settings configured in advance when an event occurs inthe alarm mode (ALM). Information of the occurred alarm will be displayed on the status display panel of themain monitor. (☞ Page 97) To reset the alarm action, click the [Alarm] button on the status display panel, andclick the alarm [Reset] button.When an item other than "Ext." is selected for "Auto reset time" on the "Event setup" tab under "REC & event"on the setup menu [Basic setup] (☞ Page 38), the following actions will automatically be taken even if thealarm action is not canceled by clicking the alarm [Reset] button.• The alarm indicator on the front panel will stop blinking and light steadily.• The alarm status display on the main monitor will disappear.• The sounding buzzer and the alarm output will stop.Step 1Click the [Alarm] button displayed on the main moni-tor, and click the alarm [Reset] button.→ The alarm action will be canceled and the alarmindicator will go off.Note:• When the alarm action is canceled, the eventrecording will stop and return to the operationalstatus just before the event occurred.Cancel the error actionWhen an error (trouble) occurred on the recorder, the recorder will take the error action (a series of actions thatnotifies of the error occurrence). Information of the occurred error will be displayed on the status display panelof the main monitor. (☞ Page 97) To cancel an error action, first click the [Error] button on the status displaypanel and then the displayed error [Reset] button.Note:• When an error occurs, take remedial action by following the instructions displayed on the error log panel(☞ Page 136). The error indicator on the front of the recorder will go off when the cause of the error hasbeen eliminated.• When the cause of the error is resolved automatically, the following operations are performed automatically.• The error indicator on the front panel will stop blinking and light steadily.• The error status display on the main monitor will disappear.• The sounding buzzer and error output will stop.• Clicking the error reset button turns off the error button and error indicator.[Operation via recorder's main monitor]
