112Correct the fisheye imageThe Fisheye image can be corrected and displayed while the fisheye image is displayed on the 1-screen in theimage display area of the control screen.Note:• The fisheye correction display is not available in wide view and on the 4-screen, 9-screen and 16-screen.The fisheye correction display button is not displayed.Step 1Confirm that the image display area is set to the 1-screendisplay of the fisheye image on the control screen.Step 2Click the 1-screen PTZ display/4-screen PTZ display.→ Corrects the fisheye image and displays on the1-screen PTZ/4-screen PTZ. Images of the follow-ing angle of view will be displayed respectively.■1-Screen PTZ displayFisheye After 1-screen correction■4-Screen PTZ display13241324Fisheye After 4-screen correctionFisheye correction display buttonNote:• Double-click of the right mouse button on the fish-eye image can correct the image and display onthe 1-Screen PTZ centering the cursor position.• Click on the image during the 1-Screen PTZ cor-rection display can change the center to theclicked position. Click an image that you want tochange the display position, and then click on theimage during the 4-Screen PTZ correction display.• The clicked position may not come to the centerdepending on the clicked position.• Double-click on the image during the 4-Screen PTZcorrection display can switch the screen to the1-Screen PTZ correction display (and vice versa).• The high resolution image and high frame rateimage may not be corrected and displayed basedon the original frame rate.Step 3Click of the fisheye display button releases the cor-rection function.Note:• The correction display position of the fisheyeimage is recorded after the recorder is turned off.• The fisheye image is displayed on the previousposition when it is displayed on the 1-Screen afterthe recorder is turned on.• The split line is displayed on the image in amoment when the correction function is cancelledfrom the 4-Screen PTZ correction display.[Operation via recorder's main monitor]
