138Step 6Click a thumbnail that you want to play and then clickthe playback button on the playback operation panel.→ Starts playback from the date and time of theselected thumbnail.Note:• You can start the playback by double-clicking athumbnail that you want to play back.Step 7To stop playback and return to live images, click thestop button on the playback operation panel.→ Playback will stop, and live images will be displayed.Note:• Playback can also be stopped and live imagescan also be displayed by the following operations:• Clicking the [×] button on the date & timeoperation panel (playback display)• Clicking the [Live] button on the date & timeoperation panel (playback display)• Changing the playback mediumStep 1Click [Search] button on the playback operation paneland click [VMD] tab. (☞ Page 109)→ The VMD search panel is displayed.Step 2Display the images from the camera to search on a1-screen.Step 3Designate the time range to search.Set the year, month, day and time of the start andend point by clicking the respective [▲]/[▼] buttons.Note:• It is also possible to set the start point and endpoint of the search range by clicking the [Start]/[End] buttons after selecting the desired time inthe [Playback] box and clicking the desired dateon the calendar.Search and play recorded images triggered by motiondetection (VMD search)Search images recorded with a camera supporting the VMD search function by the date motion was detectedand play them. Click a date & time on the result list to play corresponding recorded images.Important:• To perform the motion detection search, it is necessary to configure the settings of the connected camerasthat support the motion detection search function in advance. Refer to the "readme.txt" on the providedCD-ROM about the supported cameras. Refer to the operating instructions of the camera in use for furtherinformation.[Operation via recorder's main monitor]
