4 Make sure the Main sheet is displayed.5 In the A Media Type list, select the type of paper that is loaded. In this case, click Canon Heavyweight Coat-ed Paper.6 Select the print target in the E Print Target list.Important• When you are using paper that takes longer for ink to adhere for borderless printing and the Cutter Unittouches printing surfaces that are not dry yet, it may damage the paper or the edge of the document that iscut, depending on frequency of use. In this kind of situation, change the ink drying time using the followingprocedure.• Click Advanced Settings in Media Type.• Select an ink drying time in the list for the Between Pages setting of Drying Time.7 Click the Page Setup tab to display the Page Setupsheet.8 In the A Page Size list, click the size of the original as specified in the source application. In this case, click10"x12".9 Select and click a roll paper in the L Paper Source list.Borderless Printing at Actual Size (Windows) iPF685User's GuideEnhanced Printing Options Printing at full size82Downloaded from ManualsPrinter.com Manuals
